XCPU-P865 Polyether TDI Prepolymer untuk Cincin Pengedap
dapatkan harga terkiniJenis bayaran: | L/C,T/T,D/P |
Incoterm: | FOB,CFR,CIF |
Pesanan minimum: | 1000 Kilogram |
Pengangkutan: | Ocean |
Port: | Shanghai |
Jenis bayaran: | L/C,T/T,D/P |
Incoterm: | FOB,CFR,CIF |
Pesanan minimum: | 1000 Kilogram |
Pengangkutan: | Ocean |
Port: | Shanghai |
Model No.: XCPU-P865
Jenama: Xuchuan
Tempat Asal: China
Jenis: Resin Sintetik Dan Plastik
Application: PU Elastomers, PU plate ,PU bar, Sealing ring, PU rollers and other products.
Features: Water resistance, low temperature resistance, mildew resistance
Name Of Products: XCPU-P865
Appearances: Liquid
Unit Jualan | : | Kilogram |
Jenis Pakej | : | 20 & 200 kg/gendang |
Contoh Gambar | : |
Penerangan Produk
CPU untuk elastomer
POLYETHER TDI PREPOLYMER XCPU-P865 |
1, produk ini adalah sintesis polyether polyol dan toluene diisocyanate (T-80)
Polyether Polyurethane Prepolymer.
2, Ciri -ciri : rintangan air, rintangan suhu rendah, rintangan m
3, Permohonan : PL Plate , PU Bar , Cincin Pengedap , Penggelek PU dan produk lain.
4, Spesifikasi Produk
Name of products |
Appearances |
Viscosity(mPa.s/85℃) |
NCO% content |
Package(kg) |
XCPU-P865 |
liquid |
300-330 |
6.50-6.70 |
20 / 200 |
5, keadaan pencampuran dan pengawetan
MOCA Level |
Recommended % Theory |
Prepolymer Temperature |
Curative Temperature |
Pot Life |
Demould Time |
Post Cure Time |
% |
% |
℃ |
℃ |
mins |
@ 100°C (hrs) |
@ 100°C (hrs) |
19.6 |
95 |
75-85 |
110-120 |
2.5-3 |
1 |
10 |
6 , Prosedur Pemprosesan:
Prepolymer pada 75 ~ 85 ℃ memanaskan badan, selepas vakum degassing, cair moca baik
Pencampuran homogen, deaeration, menuangkan, membentuk, membentuk vulcanisasi, pelucutan, vulcanisasi.
Prepolimer polyseter untuk cincin
7, sifat fizikal
Polyether Polyurethane Prepolymer
Ciri -ciri yang dibentangkan di bawah ini akan digunakan sebagai panduan dan tidak dimaksudkan untuk tujuan spesifikasi.
Hardness |
Shore A |
97 |
Tensile Strength |
MPa |
35 |
100% Modulus |
MPa |
15.2 |
300% Modulus |
MPa |
24.6 |
Angle Tear Strength, Die C |
kN/m |
95 |
Trouser Tear Strength |
kN/m |
35 |
Elongation |
% |
440 |
Resilience |
% |
41 |
DIN Abrasion Resistance 10N |
mm 3 |
143 |
Cured Specific Gravity |
g/cm3 |
1.16 |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.